Recent content by 99 rs

Looks like I'm still having issues with pictures not showing up. When I click on the 3 vertical dots of the forum post in the top right corner, then click on the "Toggle BB code", all of the pictures show up. I don't know how to keep that permanently on (?or off?).

I took apart the old motor to see what went wrong. There are 2 little bearings in there and the one on the backside of this picture was seized solid (the blade side). The bearings read Thailand NMB 6082 ?608Z? This guy here was seized

New fan shroud, blade, and motor. New from Amayama was cheaper than used North America parts believe it or not. So since I could wait the 2 months it took to get here it made sense for me to go this route. Finished product. No more gap.

All 4 tabs complete. I had to put the radiator in first before the shroud. I don’t know if I just have tiny little girl hands but there was no way I can get that lower little radiator hose on without the leverage needed without the shroud in. Really happy you can get the shroud in...

Get the radiator out of the car. I suppose this modification can be done in the car but those little aluminum shavings get everywhere so not wise. And you can nick one of the many things nearby. I just used an angle grinder to shave down the tabs. Essentially you have to go all the way...

I changed out the radiator fan, fan blade, and shroud due to the meltdown from a little while ago. Refer to the radiator pictures in post number #237 for background. I have a KOYO radiator which I bought because I had a euro plate on the front of my car and I wanted extra cooling (euro plate...

https://www.amayama.com/en/part/honda/71556sl0000 71556SL0000 71557SL0000 Not sure if you'll need to drill holes in your bumper beam but they will fit.

I have nothing but good things to say about your service and hope you re-consider for us enthusiasts (not the Facebook ones). I ordered a few things from you for my transmission rebuild in Feb/Mar 2022.

It does indeed look sketchy. As Honcho stated raise one side up to the lowest axle stand setting. Then do the other side. Then go back and forth to raise higher. I do it in 2 steps with 6 tonne stands.

I got it a very long time ago but it was from heatedseatkits.com; the hottest one they make. Truthfully every eBay seller with the carbon fibre mats will probably be the same.

Definitely aftermarket but that's a shame they drilled into the sides. The OEM Honda switches fit right into the JDM switch panel (no cutting or trimming). I installed a heated seat kit into my car that you can see in the link below but I'm in Canada. I drive with the top off in single digit...

I had the same "leak" in the exact same spot. It turns out it was weeping from the valve cover and just making its way down there. That pipe with the expansion joint is for the secondary air injection. It's that loud vacuum cleaner sounding thing that runs on startup. It seems odd that those...

What's in the white Spoon box?

It's not bad links. See side-by-side screenshot of the same post below (if it works haha). Every single picture works on the other forum; the problem is with this forum. Maybe there are too many pictures for a single sheet? The other forum has fewer posts per page so there are more total pages...

Are people seeing all the pictures or are they stuck on the code? For me only a few sporadic pictures show up. I can confirm that all links work as I post in another forum and all pictures show up proper. Seems like the new forum format might have something to do with it???