Search results

I would like to thank Mark for being such a great vendor! I ordered a PRIDE Ver. 2 exhaust (Titanium tips) and it arrived on time and with more bubble wrap than the bubble wrap factory itself!! It bolted up with no issues and the fitment is great! I should also add that not only does it...

Selling my Downforce (CF) engine cover. In excellent condition. finished in Smoked clear coat. Swap over your prop rod and gasket. its that simple. $650 + shipping. UPDATE: $600 + Shipping

We all know that the first gen. NSX had a "dark brown" console. When Honda changed over to the '02 body design they also changed the console color to "bright brown" Has anyone purchased a console recently that turned out to be a brighter brown than the factory "bright brown?" basically a...

like the title states. Brand New Still in bubble wrap. $200 plus shipping.

1992 Acura NSX Exterior: Red Interior: Ivory Mileage: 102 500 kms. Vin #:JH4NA1153NT800041 Salvage title: No Documentation: 2002 to present Up for sale is a beautiful and well kept 1992 NSX. this is a Canadian car. #41 to be exact. In the past 10 years the following maintenance has been...

Selling my Fikse "Aro" rims. These are a 2 piece design. These are forged rims for high strength and are very light. I'm selling them with the tires on. Right now i have 235's on the front and 275's on the rear. ill have to check the brand of tires but haven't had time as my car is in...

looking for a new "used" set or "like new" set. must be 2002 to 2005 in factory silver.

Just like the post reads guys. Im looking to make my final big purchase and get myself one. I want the best fitment there is. So far i have found two on SOS website, a "no name" one (name is not mentioned on their site) and Taitec. what do you guys think of yours? Chris

looking for a center console in the newer style gunmetal finish and the matching driver and passenger door panels.

I recently order a CF wing for my baby and im now in the process of waiting. So now im trying to gather some info. on installation, which i must say is super easy. BUT i did read that the brake light is easy to hook up but it does not have a harness. I want to keep everything stock and i dont...

Just like the title states. Did Honda Clear coat their CF wings with a dark clearcoat? I just bought myself a CF wing from DF and want to know if I should have it "smoked" I would like it to look as stock as possible. thanks

So Downforce sells to two types of CF spoilers. One being their own design (model DF-R), and the other being a replica of the OEM Type-R spoiler (model NSX-R) Downforce states that the only difference between theirs model (DF-R)and the true replica spoiler (NSX-R) is that: "The front leg...

I purchased two new door seals a week ago and just finished installing one today. This would be the door seal that starts at inner/bottom of the A pillar and works its way down around and back up to the door latch. When i was installing it today, i felt a rubber hollow tube within my...

we all know how the tabs that hold our door panels on can easily break if you over torque the screws. So to combat this i made some custom washer made of aluminum to help. they are an exact replica of each tab and will protect as well as help our tabs from cracking or even breaking. Here are...

One of my jobs this spring was to install my aluminum door handles i bought from SOS. while i had my panels off i figured i would try to clean the 18 years of dust and scuffs on both covers. here are some shots of before and after. :D Drivers side (Before) Close up After Close up...

Looking to buy the lower center portion. All tabs must be there (4) used or new will do.

OK. so i have the typical bubbling and peeling going on on both left/right and center console. i got both door panels removed to swap out my interior door handles/ grease window tracks, replace that plastic clip with SOS aluminum clips and swap out my door speakers with my set of '99 nsx...

In a month or so it will be spring and i am figuring out what i should do in order before i put it on the road. The last thing i need to do is give it a good clay bar and polish. Does anyone here have experience with this? Or does anyone know a good shop that will do it properly for a reasonable...

Well, after reading up on valve adjustments, I've decided to do my own. The process seems to be pretty straight forward, even though it looks time consuming. Does anyone own the valve adjusting tool? If so, Would i be able to borrow it? I wont be tackling this job any time soon because i just...

Hi there. I want to buy some parts for my NSX from SOS. Now i have heard that USPS doesnt charge brokerage fees. is this true? I want to save as much as possible and the more i save the more i can spend. :) Secondly, how does customs calculate duty? is it based on value or weight. Lastly, after...

Today on my way to work i saw a red nsx on the north service rd. pulling in to a parking lot just after the rusty ship. Anyone on here. The car looked sweet.

hi fellow prime members. I am a new Prime member but some of you may already know me as the guy who checked out the Nsx at Autoforum....but i wanted to introduce myself to the entire crew. My name is Chris, i live in Ontario, Canada and about two years ago i started to get the "new" car itch...